- 10 -
Open the swinging arm
Put funnel or aluminum cup into press mould
Fill with sample
Press the sample properly with tool
Fill boric acid
（
Just boric acid tool
）
Get out the funnel
（
Just boric acid tool
）
Keep the cover in place.
Switch on the swinging arm
Push the start button to press sample
After finish, open the swinging arm
Press the button to exit mould
Remove the cover and sample (The press head moves down quickly)
Clear up the press tool for next sample
Operations for pressing sample with boric acid or aluminum cup(See flow chart as Fig.8).
Operations for pressing sample with steel ring or plastic ring(See flow chart as Fig.9).
Flow chart
Fig.8
