- 14 -
Taking the sample : It is the head holding time for people to take the sample and cover after
refund mould. If its value is too small, people may have no time to take the sample.
Few moving : It is the time of mould drop 1mm automatically after finish boric acid pressing or
aluminum cup pressing.
Demould(boric acid): It is the time for the press head drop to the position next pressing
automatically.
Demould(steel ring): It is the time for the press head drop to the position next pressing
automatically.
Demould(Plastic ring): It is the time for the tray drop to the bottom automatically after finish
plastic ring pressing.
Slow decompression: It is delay time of slow decompression stage after finish the holding
pressure. It will turn into quick decompression stage after this delay time.
Low pressure limit: It is the point when the pressure head from fast-rising to slow pressure.This
value should be set smaller.
Return difference: When holding time is set longer, the pressure may have a little drop. When
pressure difference drops to the limit, the program will do an operation to repair the pressure
automatically.
Pressure correction: If you have more requests for the pressure, you can set the deviation
