Operator Manual
BB3002 Page 67
Initial issue: 05/08
Latest revision: 11/08
4.8.9 Book output mode:
Before being directed on to the conveyor, the book can be realigned by the cover clamps and
the exit roller before being output.
4 modes for the output of the book on to the conveyor are possible:
In this mode, the book falls on the clamps and then the exit roller before being output
on the conveyor.
In this mode, the book falls on the exit roller before being output on the conveyor.
In this mode, the book falls on the clamps before being output on the conveyor.
In this mode, the book is output directly to the conveyor. The book is therefore not
realigned before being output on the conveyor.
Note: In padding mode, only output modes
2
and
4
are possible.
4.8.10 Configuring front and back glue cut-offs:
This button enables you to stop the application of glue at the front and back of the book's spine.
The button changes according to whether the glue cut-offs occur on or beyond the spine.
• In this case, the glue cut-offs are set to 5 mm from the edges of the book.
The arrows
and
modify this value.
Maximum value: 130 mm.
Default value: 15 mm.
• If the operator reduces the value below 0 mm, the glue cut-offs will be beyond
the edges of the book. Glue will therefore be applied to the whole spine of the
book.
Example: In this case, the glue cut-off will be 10 mm from the edges of the book.
Maximum value: 60 mm.
1.
2.
3.
4.
Summary of Contents for BB3002 PUR
