BWT Perla one, Installation And Operating Manual

Page: 34 / 84

34
EN
9 4 Connection
All connections can be activated or deactivated at
any time.
► Open the connection settings:
> Settings > General Information > Connec-
tion
You can start the connection wizard, perform a con-
nection test (ping), activate/deactivate connections
or set up a new connection in the Connection menu.
9 4 1 Using the connection wizard
If necessary, start the connection wizard:
> Settings > General Information > Connec-
tion > Connection wizard
► Read the related section:
– “9.1 GSM – connection wizard”, page 27
– “9.2 LAN – connection wizard”, page 29
– “9.3 Wi-Fi – connection wizard”, page 31
9 4 2 Performing a connection test
The connection test checks the connection of your
product to and from the cloud. This ensures that the
connection is working from both sides.
Requirement: Connection setup via GSM, LAN
or Wi-Fi, as well as registration, must have been
successfully performed.
Starting the connection test:
> Settings > General Information > Connec-
tion
► Press Connection test .
The connection is active if the response time is
displayed.
If
Failed
is displayed, check the connection or con-
tact your system administrator if necessary.