BWT Perla one, Installation And Operating Manual

Page: 33 / 84

33
EN
Setting the network settings manually
You must know your network settings. If necessary,
contact your system administrator.
►Complete the respective fields by entering the
IP address, subnet mask and standard gateway
according to your network settings.
► Press
CONTINUE
.
Wi-Fi connection was successful
The IP address of the product is displayed if the
connection to the home network via Wi-Fi was
successful.
► Press
CONTINUE
to continue with the registration
(see chapter “10 Registration”, page 36).
Wi-Fi connection was not successful
If the connection to the home network via Wi-Fi was
not successful, you can scan the QR code with an
Internet-enabled mobile device to obtain further
information.
► Press
REPEAT
to attempt to connect again.
► Press
CONTINUE
to exit the connection wizard.
However, you can also connect the product via GSM
or LAN to continue with registration.
Registration can also be postponed until a later time.