BWT Perla one, Installation And Operating Manual

Page: 31 / 84

31
EN
LAN connection was successful
The IP address of the product is displayed if the
connection to the home network via LAN was
successful.
► Press
CONTINUE
to continue with the registration
(see chapter “10 Registration”, page 36).
LAN connection was not successful
If the connection to the home network via LAN was
not successful, you can scan the QR code with an
Internet-enabled mobile device to obtain further
information.
► Press
REPEAT
to attempt to connect again.
► Press
CONTINUE
to exit the connection wizard.
However, you can also connect the product via Wi-Fi
or GSM to continue with registration.
Registration can also be postponed until a later time.
9 3 Wi-Fi – connection wizard
To connect the product to the home network via
Wi-Fi, you need the name of the Wi-Fi (SSID) and
the corresponding password (WPA2 key).
If necessary, start the connection wizard:
> Settings > General Information > Connec-
tion > Connection wizard
► Press Wi-Fi .