Cleaning
, maintenance and repairs
V-Mix Fix
Plus
Translation of the original assembly and operating manual
63
7.8.2
Swiveling/replacing cutting blades
WARNING
Risks of personal injury from cutting during installation work on sharp cutting
blades!
These risks may result in severe cutting injuries on hands and fingers.
Always wear cut-resistant protective gloves when working with/on the cutting blades.
To swivel/replace the cutting blades, you will need the following:
two wrenches (24 mm),
cut-resistant protective gloves,
Edge guard to cover the cutting blades during assembly work on the cutting blades.
1.
Enter the empty mixing hopper to replace the cut-
ting blades via a discharge opening. Also observe
the chapter "Entering the mixing hopper", starting
on page 59.
2.
Wear protective gloves.
3.
Cover the cutting edge of the cutting blade to be
mounted with an edge guard (1).
4.
Unscrew and remove the 3 screws (2) (M16 x 45
8.8).
5.
Replace the cutting blades and/or swivel the cutting
blades to the desired position (aggressive or
degressive); refer to page 33.
6.
Tighten all 3 screws (2) of the cutting blades.
7.
Remove all foreign objects (tools, etc.) from the
mixing hopper.
8.
After the work is completed, exit the mixing hopper
via the discharge opening.
Fig. 7-9