Transport
, setup, and initial commissioning
V-Mix Fix
Plus
Translation of the original assembly and operating manual
43
5.2
Loading and unloading the machine
Loading and unloading using lifting devices
WARNING
Risks of personal injury from crushing or impact may arise if the raised machine
falls down unintentionally!
Use only the identified attachment points when fastening lifting gear for loading and
unloading the machine by means of a lifting device.
Use suitable lifting gear capable of supporting the weight of the machine in a safe
manner.
Stay out from under the lifting zone below the raised machine at all times.
There are attachment points on the machine that are
labeled with the pictogram and can be used to attach
lifting gear.
5.3
Machine setup
The V-MIX Fix Plus is essentially supplied ready-for-operation. Just position the
machine on the customer-provided foundation planned for this purpose and secure
it.
The ground bearing capacity at the installation location must be sufficient to ac-
commodate the machine weight (for weight specifications, refer to chapter
"Technical data", starting on page 27). The ground must be vibration-free and the
underground must be stable for setup of the machine.
Also observe the chapter "General safety instructions", page 15 for this machine.
Check the machine for obvious defects prior assembly. Also observe the chapter
"Responsibilities of the operator", page 10.
When assembling the machine, also observe the operating manuals of third-party
manufacturers.
DANGER
Risks of personal injury from crushing, cutting, entrapment and impact may
arise:
if personnel are positioned between the machine and stationary objects during
setup of the machine.
if the machine is not set up in a stable manner.
if the screw connections are not tightened sufficiently.
Ensure that no one remains in possible danger areas.
Do not disconnect the machine from the lifting equipment until the machine is set
up in a stable manner.
Ensure that the screw connections are tightened to the required torque.