Cleaning
, maintenance and repairs
60
Translation of the original assembly and operating manual
V-Mix Fix
Plus
1.
Turn the mixing auger such that the cutting
blades are pointing away from the discharge
opening.
2.
Completely open the dosing gate of the door
through which you wish to enter the mixing hop-
per.
3.
Switch off the machine and secure it against
inadvertent restarting.
4.
Close the block ball valve (1) on the dosing gate.
5.
Loosen the bolt joint (2) between cover apron (3)
and mixing hopper (4).
6.
Slightly raise the cover apron to pull the flat iron
of the cover apron out of the bracket (5). You can
now swing the apron slightly to the side.
7.
Carefully enter and exit the mixing hopper via the
discharge opening and/or the conveyor belt and
discharge opening.
8.
Re-attach the cover apron (3) properly to the
mixing hopper when all necessary work on the
mixing hopper is complete:
8.1 Swing the cover apron (3) back.
8.2 Slightly raise the cover apron (3) to slide the
flat iron of the cover apron into the brack-
et (5).
8.3 Screw the cover apron (3) to the mixing
hopper.
Fig. 7-7