Chapter 16 About Appliqué(Patching Embroidery)
70
BECS-528 Computerized Embroidery Machine's Manual
Chapter 16
About Appliqué(Patching Embroidery)
When the pattern needs appliqué , the system has two ways to realize this function, which
are the manual frame-moving and auto frame-moving.
The operation method for manual frame-moving: During the embroidery, the machine will
stop automatically stops at stop code. At this moment, user can press the manual frame-moving
to move the frame to the proper position. Then user can stick a patch. After that, user needs
press “
” and “
” to return to the stop point. Finally, user can pull the bar to continue
embroidering.
Auto frame-moving: Firstly, user should add patch codes to the design. Then, user should
select the design and set it into embroidery confirmation status. Again, user needs set the offset
point for this design. Finally, user should pull the bar for embroidery. The machine will pause
at a stitch of appliqué code and automatically shift the frame to the offset point, which will let
user stick a patch. User can pull the bar to continue embroidering after sticking the patch.
The operation of adding appliqué codes to a design is as following:
(1)
Press "
" key and move the icon to "ADD PATCH CODE TO DESIGN", and
then press "
" key.
(1)
Select the pattern for adding appliqué code.
(2)
According to the prompt, user needs set the frame-out or not at each
color-changing code and stop codes.
(3)
Press "
" key to go to the main interface.
