Chapter 3 How to Start Embroidery
14
BECS-528 Computerized Embroidery Machine's Manual
3.If refusing to use the default number provided by the system, user can input the pattern
number via the keyboard. Press
to confirm the number. For wrong input, user can use
to delete the unwanted figure. After input, please press
to confirm the number. If
the number you input conflicts with the number in memory, then you should input a new
number and press "
" key to confirm.
4.Then the pattern file begins to be transmitted from disk to machine memory, and the
operation is finished.
3-3 Preparation before Embroidery
The contents below should be finished setting or confirmed before embroidery, in
embroidery preparation status. Such as: (1) Automatic color-changing or manual
color-changing, which is to change color automatically when there is color-changing code
during embroidery or to change color manually after machine stops. If it is set as auto
color-changing, user should also set the auto color-changing order. (2) Automatic start or
manual start, which is to start automatically or manually after automatic color-changing. (3)
Besides that, it is necessary to set figure direction ( see Chapter 6), the rotation angle of figure,
size ratio and number of repeating embroidery.( see Chapter 9).
3-4 Select a Pattern for Embroidery and Confirm the Embroidery
1.
Descriptions of Saving Pattern’s Start Point
(1). What is the Saving of Pattern Start Point
That means to save the start point of a pattern so that user can be waived from
repositioning when embroidering the same patterns (there may be other pattern to embroider
among them) for many times.
(2) The precondition for saving the start point of pattern
The function can be realized only when the machine has activated the function for saving
the origin point of frame (the setting method of saving frame origin is shown in Section 9-5).
(3) The main points must be explained and noticed.
Point 1: when selecting patterns, there will be a prompt “NO ZERO POINT, CANNOT
SAVE ORIGIN” if user doesn’t set the origin of frame. Then, please set frame origin, and the
function can be realized (see section 9-5 to know how to set the machine’s frame origin.)
