Chapter 2 Names of Parts on Electrical Control System
8
BECS-528 Computerized Embroidery Machine's Manual
No.
Display
Description
9
Return to origin point
With this function, the frame can return back to the position
before manual frame moving. When machine stops halfway
or embroidery is finished, the frame can return back to the
starting point of pattern with this function.
10
Return to Stop Point
After halting in the halfway of embroidery, press the manual
frame-moving key to shift the frame out (for patching cloth).
After the completion of appliqué, this function can make the
frame return to the stop point.
11
Exit
Press the key to quit the corresponding operation..
12
Confirm Embroidery
Press the key to confirm embroidery or cancel embroidery.
13
Enter
Press the key to confirm the corresponding operation.
14
Blank or Add 10
Press the key to add blank or add 10 to number.
15
Spot Moving
After stop, press this button to make the motor run one lap
16
Manual Frame Moving
The direction of frame moving is the same as the direction
key. The combination of directions is supported(Pressing the
neighboring direction buttons will have the frame to go
along the line 45° from the basic direction). Press central
key to switch the frame-moving speed between high and
low.
17
Speed
Adjustment
Press
to reduce speed and
to inrease.
18
Number Sign
Change number sign when you input number.
19
Delete
Press the key to clear the inputting or controller records.
20
Number Key
This is used for selecting menu or setting parameters.
21
Customized Button
It is used to set the parameter that is changed frequesntly
2-2 Trimming
Thread
Automatic Trimming: When operations such as color-changing, frame jumping, etc. are
required in embroidery, as well as at the end of embroidering, the machine can trimming thread
