Butterfly BECS-528 Owner'S Manual Download

Page: 26 / 130

Chapter 4 Normal Embroidery and Idling

BECS-528 Computerized Embroidery Machine's Manual

4-5 Positioning

Idling

The positioning idling can make the frame directly run forwards (or backwards) to an

assigned counting position, or to a latest color-changing position, or even to a latest stop-code

position.

Operation:

(1)

Press "

" key (in embroidery confirmation state) to enter the assistant

management interface:

(2)

Press icon to move to "FRAME TO POINT (OPTIONAL)", and then press "

key. The positioning idling menu displays as following:

(3)

Press "

、

" key to select the desired mode of positioning idling, and

then press "

" key.

(4)

Continue the operation for different positioning idling according to the prompts

respectively.

Summary of Contents for BECS-528



































































































































Search results

Summary of Contents for BECS-528

Reviews:

Related manuals for BECS-528

Brands by name

Popular brands

Butterfly BECS-528, Owner'S Manual

Search results

Summary of Contents for BECS-528

Reviews:

Related manuals for BECS-528

Brands by name

Popular brands