Appendix
Ⅲ
Make Special Multi-Sequin Design
BECS-528 Computerized Embroidery Machine's Manual
117
2)
Apply the above motif to achieve alternative A1B1, as shown in below.
6
、
Design maker should build up design data base
Now we have sequins: 3MM, 4MM, 5MM, 6.75MM and 9MM. while the first needle
position can have 4 sequin delivery devices at most. So we can get the following 15
combinations: A,B,AB,C,AC,BC,ABC,D,AD,BD, ABD,CD,ACD,BCD,ABCD.
The design data base should be the combination of the above sequin sizes and
sequin groups.
If there are two sequin delivery devices A and B, and A design document uses
3MM sequin and 5MM, the design data base should contain 3MM-A base, 5MM-B base,
and 5MM-AB base. While the other design uses 4MM and 6.75MM, then the design data
base should contain 4MM-A, 6.75MM-B and 6.75MM-AB.
If there are three sequin delivery devices A, B and C, and A design document uses
3MM, 4MM and 6.75MM, the design data base should contain 3MM-A base, 4MM-B
base, 4MM-AB base, 6.75MM-C base, 6.75MM-AC base, 6.75MM-BC base and
6.75MM-ABC base. While the other design data base uses 3MM, 6.75MM and 9MM,
the design data base should contain 3MM-A base, 6.75MM-B base, 6.75MM-AB base,
9-C base, 9-AC base, 9-BC base and 9-ABC base.
Other sequin design data bases are formed in the same principle.
The alternative sequin design data base should combine single and overlap sequins.
For instance, 3MM-A sequin base and 4MM-AB sequin base can form alternate sequin
of 3MM-A & 4MM-AB, which achieves embroidery effect of A, AB, A, AB…
