background image

INSTRUCTION, USE AND

MAINTENANCE MANUAL

GB

Page 11 of 68

After removing the packing, and in the case of the ma-
chine packed fully assembled, check that the machine 
is complete and that there is no visible damage. If in 
doubt 

do not use the machine 

and refer to profession-

ally qualified personnel (to the seller). The packaging 
components (plastic bags, expanded polystyrene, nails, 
screws, pieces of wood, etc.) must be collected up and 
disposed of through according to the in force laws.

THE BOX CONTAINING THE FIX-

TURES IS CONTAINED IN THE 

WRAPPING. DO NOT THROW IT 

AWAY WITH THE PACKING.

7.0 MOBILIZATION

   

   

   

THE LIFTING EQUIPMENT MUST WITHSTAND 

A MINIMUM RATED LOAD EQUAL TO THE 

WEIGHT OF THE MACHINE (SEE PARAGRAPH 

TECHNICAL SPECIFICATIONS).  DO NOT AL-

LOW THE LIFTED MACHINE TO SWING.

During the machine handling from the unpacking po-
sition to the installation one, follow the instructions 
listed below.
• Protect the exposed corners with suitable material 

(Pluribol/cardboard).

• Do not use metallic cables for lifting.
• Make sure that the electricity supply is not connected.
• Lift and transport with suitable device as indicated 

in 

Fig. 7 

(forks introduced in the middle to ensure 

a correct loads distribution).

Fig. 7

7503-M002-6_B

NAV26HW - NAV26HW.S - NAV26HW.ST

5.0  PACKING AND MOBILIZATION FOR 

TRANSPORT

   

   

   

HAVE THE MACHINE HANDLED BY SKILLED 

PERSONNEL ONLY. 

THE LIFTING EQUIPMENT MUST WITHSTAND 

A MINIMUM RATED LOAD EQUAL TO THE 

WEIGHT OF THE PACKED MACHINE (see para-

graph “TECHNICAL SPECIFICATIONS”). 

The machine is packed completely assembled.
The  cardboard  box  containing  it  is  fastened  to  a 
pallet  and  has  dimensions  of  mm  1600x950x1780 
(for  NAV26HW  -  NAV26HW.S  versions)  and  of  mm 
1950x950x1300 (for NAV26HW.ST version).
The  displacement  must  be  performed  through  ad-
equate lifting device (fork lift truck). Lift the packaging 
as indicated in 

Fig. 6

 (forks introduced in the middle 

to ensure a correct loads distribution).

Fig. 6

6.0 UNPACKING

DURING UNPACKING, ALWAYS 

WEAR GLOVES TO PREVENT ANY 

INJURY CAUSED BY CONTACT 

WITH PACKAGING MATERIAL 

(NAILS, ETC.).

Summary of Contents for NAV26HW




































































































Reviews: