Bush CMC1113DABBT Instruction Manual Download Page 50

Page: 50 / 56

Product support

Help is always at hand

Product support

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the

Troubleshooting

Problem

Reason(s)

Solution(s)

No power

Power cable not connected
to wall socket.

Power socket is not
switched on.

Make sure the plug is
connected.

Switch the power on.

No Sound

No Sound from AUDIO IN/
BT input

Volume is too low.

AUDIO IN/BT source
volume is too low.

Increase the volume.

Increase the output volume
of the AUDIO IN/BT source.

Sound is distorted

Sound is distorted from
AUDIO IN/ BT input

Volume is too high.

AUDIO IN/ BT source
volume is too high.

Reduce the volume.

Reduce the output volume
of the AUDIO IN/ BT
source.

Unable to Play CD

No disc in the tray.
Disc not loaded properly
Disc is dirty.

Insert a compatible disc.
Check the disc loaded
Clean the disc.

Static/Burbling Sound
(radio)

Poor reception.

Re-locate the antenna.

Unit switches off after 20
minutes of inactivity

Auto standby mode in
operation.

This unit is designed to
enter STANDBY mode
automatically after 20
MINUTES of inactivity.

Press the STANDBY button
to wake the unit.

Summary of Contents for CMC1113DABBT

























































Search results

Summary of Contents for CMC1113DABBT

Reviews:

Related manuals for CMC1113DABBT

Brands by name

Popular brands

Bush CMC1113DABBT, Instruction Manual

Search results

Summary of Contents for CMC1113DABBT

Reviews:

Related manuals for CMC1113DABBT

Brands by name

Popular brands