Bush CMC1113DABBT, Instruction Manual

Page: 36 / 56

Using your Micro System
Let’s get started
Using your Micro System
36
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Skipping MP3 tracks on a USB flash drive
1.
Skip to the next track by pressing on the micro system
(7)
or remote control.
2. Skip to the previous track by pressing on the micro system (6) or remote control.
Fast searching MP3 tracks on a USB flash drive
1.
To fast forward a track during playback press and hold on the micro system or
remote control.
2. To fast rewind a track during playback press and hold on the micro system or
remote control.
Programmed playback (USB)/ MP3CD
1.
Press the STOP button (4) to stop playback (if required).
2. Press the MEMORY button on the remote control. You will see the below options
appear on the display.
(Fig 17)
3. Use the /- buttons on the remote control to select the folder that track 01
resides in. Press the MEMORY button to proceed to the next step.
4. Use the / buttons to select the track you’d like as track 01.
5. Press the MEMORY button to proceed to programming the next track.
6. Repeat steps 3-5 until you have programmed all the tracks you require in the playlist,
up to a maximum of 100 tracks.
7.
Press the PLAY/PAUSE button
(3)
on the micro system or remote to begin playback
in the programmed order.
8. To cancel the program sequence press the STOP button (4) on the micro system or
remote twice.
MEMORY P-01
F-001
Fig 17.