Bush CMC1113DABBT, Instruction Manual

Page: 34 / 56

Using your Micro System
Let’s get started
Using your Micro System
34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Pruning DAB stations
When the radio has performed a Scan in several locations you may find there are stored
stations that you can no longer receive. This function automatically removes them from
the stored station list.
1.
Press the MENU button on the remote or press and hold the MENU/INFO button on
the micro system.
2. When the ‘FULL SCAN’ option appears press either TUNE or TUNE buttons on the
remote or
/ buttons on the micro system and locate ‘PRUNE’, press the ENTER
button on the remote or UNPAIR/ENTER on the micro system.
3. Use the TUNE or TUNE buttons on the remote or / buttons on the micro
system to select ‘YES’ and press the ENTER button on the remote or UNPAIR/ENTER
on the micro system.
DRC (Dynamic range control)
This function causes the radio to reduce the dynamic range of the audio signal. The
purpose of this is to adapt the dynamic range of the audio signal to listening in a noisy
environment.
This is not available on many DAB stations.
1. Press the MENU button on the remote or press and hold the MENU/INFO button on
the micro system.
2. When the ‘FULL SCAN’ option appears press either TUNE or TUNE buttons on the
remote or
/ buttons on the micro system and locate ‘DRC’, press the ENTER
button on the remote or UNPAIR/ENTER on the micro system.
3.
Use the TUNE or TUNE buttons on the remote or / buttons on the micro
system to select between DRC OFF, DRC LOW and DRC HIGH.
4. Press the ENTER button on the remote or UNPAIR/ENTER on the micro system to
save the setting.