![background image](http://html1.mh-extra.com/html/bush-hog/hdth5/hdth5_operators-manual_2834805131.webp)
TROUBLE SHOOTING GUIDE
Problem Possible
Cause
Remedy
STREAKING
Slow blade speed.
Operate PTO at 540 RPM.
Worn blade tips.
Replace with Genuine Bush Hog Blades.
See your Bush Hog Dealer.
Dull blades.
Sharpen blades uniformly.
Blades unable to cut that part of
Slow ground speed of tractor but keep
grass pressed down by path of
engine running at full PTO rpm.
tractor tires or casters.
Cutting lower will help.
Mowing too fast.
Slow down until cured.
Drive belt loose.
Tighten per instructions.
Belt Glazed/Slipping
Apply belt dressing or replace with
special Bush Hog belt.
Blade loose on spindle.
Tighten blade bolt securely.
Conditions too wet for mowing.
Allow grass to dry before mowing.
MATERIAL DISCHARGES
Material too high and too much
Reduce ground speed but maintain
material 540 rpm at tractor PTO, or make
two passes over material. Raise the
mower for the first pass and lower to
desired height for the second and cut
at 90 deg. to first pass. Raise rear of
mower high enough to permit material
to discharge, but not so high that
conditions listed above occur.
Belt Slipping
Tighten or replace with special Bush Hog
belt
Grass wet
Allow grass to dry before mowing.
Slow ground speed of tractor but keep
engine running at full PTO rpm.
Cutting lower will help.
HEAVY VIBRATION
Too high blade speed.
Do not exceed 540 PTO rpm.
Broken/Bent Blade.
Replace with genuine Bush Hog blades.
See your Bush Hog dealer.
Worn/Unbalanced Blade
Grind uniformly or replace.
Bent/Broken sheave.
Replace parts.
Trash hung on blade.
Clean off blade.
BELT SLIPPING
Belt loose.
Replace with special Bush Hog belt.
Belt glazed.
Use belt dressing or replace.
Oil on belt.
Clean or replace.
STREAKING
Slow blade speed.
Operate PTO at 540 RPM.
Worn blade tips.
Replace with Genuine Bush Hog Blades.
Dull blades.
Sharpen blades uniformly.
Blades unable to cut that part of
Slow ground speed of tractor but keep
grass pressed down by path of
engine running at full PTO rpm.
tractor tires or casters.
Cutting lower will help.
Mowing too fast.
Slow down until cured.
Drive belt loose.
Tighten per instructions.
Belt Glazed/Slipping
Apply belt dressing or replace with belt.
Blade loose on spindle.
Tighten blade bolt securely. (NOTE:
Conditions too wet for mowing.
Allow grass to dry before mowing.
HDTH 5 & 6 Finish Mower 08/21
Operation Section 4-27
© 2021 Alamo Group Inc.
OPERATION
OPERA
TION
Summary of Contents for HDTH5
