Bush Hog HDTH5, Operator'S Manual

Page: 101 / 174

HDTH 5 & 6 Finish Mower 08/21
Assembly Section 3-9
© 2021 Alamo Group Inc.
ASSEMBLY
ASSEMBL
Y
DRIVELINE ATTACHMENT (Figure 3-7)
The Driveline Supplied with the HDTH Series Finish Mowers are ASAE size 3 with 1-3/8”- 6 spline yokes.The im-
plement yoke may have a locking push pin or a locking collar for the driveline to lock to the implement gearbox
shaft. The tractor yoke of the driveline is a locking collar style
.
Place the yoke with the locking push pin or locking collar locking ring on the implement gearbox shaft depress the
locking pin or slide the collar back and slide the yoke on the gearbox shaft until the locking pin or locking balls en-
gage the locking groove of the gearbox shaft. Release pin or collar and give a firm tug on the driveline to be sure
the driveline is locked in the groove.
Figure 3-7
Lock Collar
Locking Ring
Locking Push Pin
or
Lock Collar Locking
Ring
IM POR T A NT : Scan this Q R Code with your smart phone to l ink to the ADMA
Drive l ine Safety Manua l for more information on the safe use of a drive l ine during
norma l operation and maintenance . Or type in your internet browser the fo ll owing
web address: www . a l gqr . com/dme
Ops-000 9 -MISC