Bush Hog HDTH5, Operator'S Manual

Page: 99 / 174

HDTH 5 & 6 Finish Mower 08/21
Assembly Section 3-7
© 2021 Alamo Group Inc.
ASSEMBLY
ASSEMBL
Y
LIFT PINS
Lift Pins 3 Pt Lift (Figure 3-5)
For Standard pt. lift attachment to tractor the Cat.I Lift Pins attach to the Lift Arms using 7/8” lockwashers and 7/8”
hex nuts.
Category II Adaptor Bushings (1-7/8” long x 1-7/16” diameter) are supplied in the Bag of Parts. These Adaptor
Bushings are used on the Category I lift pins when attaching the machine to a tractor with Category II lift arms and
when attaching the machine to a tractor equipped with a Quick Hitch system.
Adaptor Bushing
Category l
Quick Hitch
Lift Arm
Category I
Lift Pin
Figure 3-5
The 3-Point Hitch System on this mower has been designed for front to back
flotation when mowing on uneven terrain. The tractor lift arms should be
set such that the mower 3-Point lift arms are parallel to the ground in floating
position.
I M POR T AN T : Scan this Q R Code with your smart phone to l ink to the P A M I Safe
I mp l ement Hitching Manua l for more information on correct l y connecting
agricu l tura l tractors to imp l ements . Or type in your internet browser the fo ll owing
web address: www . a l g q r . com / hme Ops-0008-MISC