Operation
page
22
Answering a landline call during a mobile call
When a call is in progress over the mobile network, an incoming
call over the landline will cause three short beeps to be heard in the
handset and the caller identity will be shown on the display. There
are several options.
• Replace the handset to discard the mobile call and lift it again to
accept the landline call.
• Press the recall button on the phone (or quickly tap the hook
switch) followed by the
0
key to accept the landline call and put
the mobile call on hold.
• Press recall on the phone (or quickly tap the hook switch) again to
display the options for rejecting the held call or swapping to the
previous call. Use the or
#
keys to choose the required option
and press
0
to accept.
Aborting fax or data calls
If a data call or fax call is in progress between the unit and a con-
nected computer, it is not possible to make a voice call at the same
time. However it is possible to abort the data/fax call using the fol-
lowing procedure:
1 Lift the handset and attempt to make an outgoing call, for exam-
ple by dialling
01
. The unit will immediately indicate it is not possi-
ble to dial a voice call by displaying “Busy, hang up” and emitting
a busy tone.
2 Press the recall button on the phone (or quickly tap the hook
switch) which will cause the display to show “Abort data/fax?”
3 Press
0
to end the data or fax call.
Incoming calls during menu access
If an incoming call is received during interaction with user functions,
for example editing the phone book, a ringing tone will be heard
through the handset. When the handset is replaced, the phone will
ring and the call may be answered in the normal way.
