Further information
page
29
Alert settings
(
0#5230
)
•
Ring cadence
non-‘L’ models only
(
0#52310
) - Select one of four
different ring cadences. Each cadence is demonstrated through
the handset as the options are changed.
•
Ring cadence from mobile network
‘L’ models only
(
0#523110
)
- Select one of four different ring cadences for incoming calls from
the mobile network. Each cadence is demonstrated through the
handset as the options are changed.
•
Ring cadence from landline
‘L’ models only
(
0#523120
) - Select
one of four different ring cadences for incoming calls from the
landline. Each cadence is demonstrated through the handset as
the options are changed.
•
Ring for new message
(
0#52320
) - Select whether to provide a
short ring when new text messages are received.
•
CLI type
(
0#5240
) - Allows you to match the Calling Line Identity
(Caller ID) scheme used by the unit to that used by your service
provider. CLI presents the caller’s phone number and name (if
there’s a match in your phonebook) plus the date and time for
display on the attached telephone.
Note: The time displayed on landline calls is provided by the land-
line Caller ID mechanism. Caller ID from incoming mobile calls
use the unit’s internal clock. To avoid the confusion of different
times, it is recommended that you
to the correct time
using menu (
0#550
).
•
Allow reject
(
0#5250
) - When enabled, the unit will provide an
opportunity to accept or reject incoming calls after picking up
the receiver. The display will show
‘Accept? 01234 567890’
or will
show a name, if the caller is listed in the phonebook. During this
process, the caller will continue to hear a ringing tone. To accept
the call, press the
0
key. To reject the call, simply hang up (the
caller will hear a disconnect tone).
•
Change volume
(
0#5260
) - Allows you to choose one of three
earpiece volume boost levels.
•
Allow recall/flash
(
0#5270
) - Controls the use of recall/flash-hook
as used during in-call functions such as accepting call waiting
calls and other functions that require the use of recall/flash-hook.
•
End of call signal type
(
0#5280
) - Allows the selection of one of
three signalling methods for the end of incoming call: Tone and
K-Break (default); tone and line reversal; or only tone.
•
Tone and Kewlstart
(
0#52850
) - A variation of the ‘Tone and K-
Break’ signalling method. This option allows you to extend the end
of call break time (
disconnect clear time
) from 275mS to 800mS.
This is necessary when used with Asterisk PBX equipment.
•
Call progress announce
(
0#5290
) - When enabled, this option
generates audible progress announcements when making calls
via the mobile connection. Once dialling has completed, the an-
nouncement “Please wait for your call to be connected” will be
played. If the call cannot be connected for a temporary reason
(e.g. number busy), the announcement “Your call cannot be con-
nected at the moment, please try again later” is played. If there
is another reason, the announcement “Your call cannot be con-
nected at the moment” will be played.
