Burnside T9 series, User Manual

Page: 16 / 47

Contents Introduction Operation Further information Installation Index page 5
Using the call register
The Burnside unit maintains records of incoming calls that are
missed or successfully received, as well as the most recently dialled
outgoing calls. The call register also provides the duration of the last
call and allows you to set limits for the collective duration of outgoing
calls (see
Tariff timer functions
).
To view call register records
1 Lift the phone handset and choose the required register:
• For missed calls (incoming calls that were not answered),
dial
0#310
.
• For received calls (incoming calls that were answered),
• (units without landline option) dial
0#320
.
• (units with landline option) Mobile calls, dial
0#3210
.
• (units with landline option) Landline calls, dial
0#3220
.
• For outgoing dialled calls (not via phonebook), dial
0#330
.
In all cases, a list of numbers will be displayed and you can use
the phone keys as follows to scroll down, up or to dial entries:
#
to scroll down the list of numbers by one place,
to scroll up the list of numbers by one place,
0
to dial the number that has the flashing highlight.
To erase the dialled list
1 Lift the phone handset and dial
0#340
.
2 Press the
0
key to confirm.
To show durations
1 Lift the phone handset and dial
0#350
. The display will show:
Duration of last call
Duration of all calls since manufacture
To show the GPRS log
1 Lift the phone handset and dial
0#360
. The display will show:
Total data received
Total data transmitted
Note: The log is updated at the end of a GPRS session.
To clear the GPRS log
1 Lift the phone handset and dial
0#370
. Then press
0
to confirm the
clear operation.
Note: If the SIM is changed, the registers will be automatically
erased. If the SIM is removed and then replaced, the registers will
remain unchanged.