BURNiT Lambda series, Installation And Operation Manual

Page: 8 / 36

TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
8
*
Important: When installing the
boiler, the wooden pallet onto
which the boiler is placed must
be removed by unscrewing the
bolted connections using flat
ring wrench S13.
Diagram 3
Model A B C D kg
20 kW 850 1200 120 1360 490
30 kW 850 1260 120 1470 572
5. DELIVERY OF THE BOILER
• Inspect the integrity of the packaging
upon delivery.
• Check whether all components have
been delivered to you. Boiler scope of
delivery includes:
1) Boiler body with boiler doors
2) Safety valve 3 bar.
3) Ash pan
4) Cleaning brush for flue pipes
5) Cock G ½”
6) Installation and operation manual
7) Service booklet and Warranty card
If any of the above items are missing,
contact your supplier.
• You must remove the polystyrene blocks
placed in the combustion chamber prior
to putting the boiler into operation.
6. ASSEMBLY OF THE HEATING BOILER
*
The assembly, installation and
set-up of the boiler must be
performed by a technician
authorized for such operations.
Installer must indicate to the user
of the installation the minimum
clearances from flammable
materials and liquids.
6.1. Requirements:
- Boiler room must be frost-proof;
- Boiler room must allow for continuous
access of air necessary to maintain
combustion;
- Boilers must not be placed in inhabitable
rooms;
- All boiler rooms must have correctly
calculated vent depending on the boiler
output. The vent must be protected by
means of a net or grate.
The size of the vent is calculated according
to the formula:
А=6,02Q - where:
А – area of the vent in cm,
Q – boiler output in kW
- Remove the packaging without polluting
the environment;
- Observe building supervision
instructions, in particular the existing
Ordinance on combustion devices and
storage of combustion materials, on
building requirements applicable to
installation sites and on ventilation;
- The boiler must be placed on a
foundation whose surface area is larger
than the base of the heating boiler
according to diagram 1;
- The boiler must be placed in a position