24
Assembly
By
→
turning the open-end wrench clockwise (viewed from above),
move the actuator into the required position.
Open-end wrench
Place open-end wrench on the hexagon
Fig. 19:
Open-end wrench
for securing the
nipple
Open-end wrench
for turning the
actuator
Turning with open-end wrench
Fig. 20:
8.4.
pneumatic connection
Danger!
risk of injury from high pressure in the equipment!
Before dismounting pneumatic lines or valves, turn off the pres-
•
sure and vent the lines.
Warning!
risk of injury from unsuitable connection hoses!
Hoses which cannot withstand the pressure and temperature
range may result in hazardous situations.
Use only hoses which are authorized for the indicated pressure
•
and temperature range.
Observe the data sheet specifications from the hose
•
manufacturers.
for control function i – danger if control pressure fails!
For control function I control and resetting occur pneumatically. If
the pressure fails, no defined position is reached.
To ensure a controlled restart, first pressurize the device with
•
control pressure, then switch on the medium.
english
Type 2000/2002
Summary of Contents for Type 2000
Page 93: ......
