54
Operation and function
ATTENTION!
Damage or malfunction due to penetration of dirt and humidity.
▶
To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674078
22)
).
The following basic function can be changed via the communications software only.
Function
Description
Factory setting
Standard signal
23)
INPUT
Entry of the standard signal input
for the set-point value
4 – 20 mA, 4-wire
Reversal of the
effective direction set-
point value
DIR.CMD
Effective direction between input
signal and set-point position
OFF (fall)
Table 26:
Basic functions
The
INPUT
,
CUTOFF, CHARACT and DIR.CMD functions can
be parameterized via the communications
software.
The X.TUNE and RESET functions can also be started with the communication software.
22)
The assembly tool (674078) is available from your Bürkert sales office.
23)
Only variant without fieldbus communication.
english
Type 8696, REV.2
Summary of Contents for 8696
Page 74: ...74 english Type 8696 REV 2...
Page 75: ...www burkert com...
