68
Operation and function
14.2.9
OUTPUT
(variant) -
Configuration of the analog output (only for variant without
fieldbus communication)
The function analog output (OUTPUT) only appears in the selection of functions if the positioner has an
analog output (variant) or if no parameters have been read in yet.
The analog output can be used for feedback of the current position or of the set-point value to the control
center.
Function Position (POS)
Output of the current position
Set-point value (CMD)
Output of the set-point value
Standard signal 4 – 20 mA
Selection of the standard signal
0 – 20 mA
14.2.10
Setting the LED mode, device status
User level: installer
Factory setting: valve mode + warnings
Menu or function
Values or description
Device
>
General settings
>
Parameter
>
Status LED
Mode
NAMUR mode
Valve mode
Valve mode + Warnings
Fixed color
LED off
Setting the LED mode, device status:
→
Status LED
→
Mode
Possible selection:
NAMUR mode
Valve mode
Valve mode + Warnings
Fixed color
LED off
→
Select mode.
The mode is set.
english
Type 8696, REV.2
Summary of Contents for 8696
Page 74: ...74 english Type 8696 REV 2...
Page 75: ...www burkert com...
