Bürkert 8695, Operating Instructions Manual

Page: 32 / 192

32
Electricalinstallation24VDC
9.2 electrical installation
configuration circular plug (m12 x 1, 8-pole):
6
1
7
5
4
3
2
8
Figure 20: Circular plug M12 x 1, 8-pole
pin Wire color
3)
Designation Configuration external circuit / signal level
1 white limit switch top IN 1 (=Top)
1
2
GND
+ 24 V
IN 1
IN 2
{
100K
2 brown limit switch bottom IN 2 (=Bot)
3 green Supply voltage GND
3
4
GND
24 V
4 yellow Supply v 24 V DC
5
grey Valve control unit + Valve +
5
6 24 V
GND
6 pink Valve control unit - Valve -
7 - not used
8 - not used
Table 3: Connection with circular plug-in connector
→
Connect the control head according to the table.
When the supply voltage is applied, the control head is operating.
→
To read in the end positions of the valve, start the teach function (see “9.3 Teach function (calibrating the end
position)”
).
3)
The indicated colors refer to the connecting cable available as an accessory (919061).
english
Type 8695