Burkert B0A1C2B1A4A0, Operating Instructions Manual, Page: 70 / 92


69
English
SE58
L
This function shows the status of the SD card as shown in the following figure.
(POS. 12.9) SD memory STAtus
[SD card info]
AL0
[SDSTA]
Firmware info version/revision
(POS. 12.10) MODel and Software Version
[Firmware info]
AL0
[MODSV]
The SD card must be replaced only by the service or authorized personnel. The card must have this
characteristics:
Total Size
Available memory
Cluster Memory
Use time remaining SD card *
The statistical calculation is performed every time the command SDSTA is invoked. The statistical data are
updated AUTOMATICALLY every day (24 hours) or manually each time the function is called to display or send
the SDSTA command. However, given that for the detection is necessary a minimum of one hour, the data will
not be recomputed before this time interval.
Day Hours Minutes Seconds
minimum time of 1 hour for the new data update
Interface SD 3.0, Class 10, UHS-I
Connector Standard microSD 8 pin
Outline Dimensions 11 x 15 x 1 mm
Sequential Read
Performance (MB/s)
> 10 MB/s
Density Range 4GB to 32GB (SDHC only)
Data Retention > 5 years
Endurance > 3000 P/E cycles
Operating Temperature -25 to +85 °C
MTBF ≥ 3,000,000 hours (0 - 30°C)
Voltage 2.7 – 3.6 V
Power Consumption
Read typically <160 mA - Write typically < 130 mA,
Idle typically < 300 uA