53
English
SE58
L
BATCHING OPERATIONS:
ACTION:
OPERATION:
NOTES:
Start/stop by display
Press “UP” key on the keyboard
When the batching process is
manually stopped, the OUT1
function is disabled and the
batching cycle is interrupted with
the valve closing.
Every time the batching cycle
starts, the set quantity counter
and the alarms are reset.
Start/stop by MCP
Type MCP command “BTACT”
Start/stop by input
External signal connected to digital input 1.
N.B: The signal must be a pulse and its
duration must be greater than the time of the
measurement cycle.
See “DIGITAL INPUT ON/OFF OPERATION”
Start/stop by ModBus
Send the MODbus command 5 (see MODbus
manual)
Visualize batching status by
display
Batching in progress symbol on
the display
Visualize batching status by
MCP
Type the MCP command “BTACT?”
If = 0 the actuator is closed
If = 1 the actuator is open (batching in
progress)
By display
Enter to the 3. Scale menu;
Set the B.qty (batching quantity) value
By MCP command
“BTQTY?”
Through this command it can be set both
the unit measure or the quantity (see MCP
manual)
VALUES:
0:’ml’|1:’cm3’|2:’l’|3:’dm3’|4:’dal’|5:’hl’|6:’m3’|7:’
Ml’,0.00001 <> 99999.9
By ModBus interface
Using the ModBus command 16 (see
MODbus manual)
BATCHING QUANTITY SETTINGS:
Summary of Contents for B0A1C2B1A4A0
