Burkert B0A1C2B1A4A0, Operating Instructions Manual, Page: 69 / 92


68
English
SE58
L
This function displays graphs of input Z, C. current, C. Volt, C.Load, Input 1, Input 2, Input1-Input 2, Analog to
Digital Transmitter.
Automatic finding of a parameter set for a generic sensor.
(POS. 12.7) OscilloSCOPe function
[ Display graphs ] AL5
[OSCOP]
(POS. 12.8) Generic sensor set
[ Gen.sens. set ] AL5 NO MCP COMMAND
Following are the states for the PPP link and MCPI to connect the device.
PPP link status:
“UNDT” = undetermined
“DEAD” = dead, link down, persistent condition
“LCP” = LCP phase, transition condition
“AUTH” = Authentication phase, transition condition
“IPCP” = IP and DNS addressess assign phase, transition condition
“NETW” = network established (normal persistent condition when the link is UP)
“TERM” = link termination request, transition condition
MCPI link status:
“CLOSED” = socket closed
“ACCEPT” = socket awaiting for new connection
“ESTABLISH” = link established
“CLS_WAIT” = waiting for closure
“LAST_ACK” = last ACK sent
“FIN_WAIT” = (see TCP/IP RFC documentation)
“TIME_WAIT” = (see TCP/IP RFC documentation)
Create a list of diagnostic values on the device communication.
(POS. 12.6) Diagnostic Communication VaLueS
[ Disp. comm. vars ]
AL5
[DCVLS]
PPP link status
MCPI socket status