Burkert B0A1C2B1A4A0, Operating Instructions Manual, Page: 45 / 92


44
English
SE58
L
Setting partial positive totalizer decimal point position.
Example: P+D.P.= 3 visualized value P+dm³ 0.000 / P+D.P.= 2 visualized value P+dm³ 0.00
This function is active with POS. 9.8 see page 36, enabled.
Setting total negative totalizer measure unit type: metric or not metric (Imperial units).
This function changes the values measure unit on POS. 2.13 see page 34.
It is visualized on visualization pages.
Setting total negative totalizer measure unit.
This function visualized on visualization pages.
Setting total negative totalizer decimal point position.
Example: T- D.P.= 3 visualized value T- dm³ 0.000
T- D.P.= 2 visualized value T- dm³ 0.00
This function is active with POS. 9.8 see page 36, enable.
Setting partial negative totalizer measure unit type: metric or not metric (Imperial units).
This function changes the values measure unit on POS. 2.16 see page 34
It is visualized on visualization pages.
Setting partial negative totalizer measure unit.
This function visualized on visualization pages.
Setting partial negative totalizer decimal point position.
Example: P- D.P.= 3 visualized value P-dm³ 0.000
P- D.P.= 2 visualized value P-dm³ 0.00
Setting temperature measure unit.
Enable or disable the selection of mass unit of full scale set.
Setting specific gravity coefficient. This function is active with POS. 2.19 see page 34, enabled.
(POS. 2.11) Totalizer Total Positive Decimal Point position [P+ D.P.= x] AL2
[TPPDP]
(POS. 2.12) Totalizer Total Negative Unit of measure Type [T- unit= METRIC]
AL2 [TTNUT]
(POS. 2.13) Totalizer Total Negative Unit of Measure [T- unit= dm³]
AL2
[TTNUM]
(POS. 2.14) Totalizer Total Negative Decimal point position [T- D.P.= x] AL2
[TTNDP]
(POS. 2.15) Totalizer Partial Negative Unit of measure Type [P- unit= METRIC]
AL2 [TPNUT]
(POS. 2.16) Totalizer Partial Negative Unit of Measure [P- unit= dm³] AL2
[TPNUM]
(POS. 2.17) Totalizer Partial Negative Decimal Point position [P- D.P.= x] AL2
[TPNDP]
(POS. 2.18) TeMPerature Unit of Measure [Temp. unit= C°] AL2
[TMPUT]
(POS. 2.19) MaSS Units Enable [Mass units= ON/OFF] AL2 [MSSUE]
(POS. 2.20) Volume to Mass Specific Gravity Coefficient [Sg= Kg/dm³ x.xxxx] AL2
[VMSGC]