Burco CT10L, Instruction Manual

Page: 6 / 16

6
Technical Data
Installing your Burco boiler
Before connecting to the power supply

Remove all packaging and plastic coating from the appliance

Check the unit has not been damaged in any way during transportation. Report any damage to the
company who sold you the boiler right away.

Check the available power supply corresponds to that shown on the rating label of the appliance, which
must be A.C. (Alternating Current).

Ensure the yellow steam cap is removed from the steam vent prior to powering appliance.

The location must be frost free.
Connecting to the water supply

Connection from the cold water supply to the appliance should only be made by the hose supplied.

In hard water areas, it is always advisable to fit an inline filtration unit to limit scale build-up. If you
have purchased a Burco boiler that does not have a water filter system included, we recommend you
fit a separate water filter between the boiler and the mains supply.

Always ensure mains water supply is turned off, or localised isolation valves are closed before
attempting to connect boiler to the mains water supply.

The inlet water connection to the inlet solenoid valve is
¾” BSP, this should be connected to the mains
water supply via an accessible isolating tap.

The blue pipe connects to the grey fitting which can be found underneath the appliance.

Firmly push the blue pipe into the small outlet hole on the grey fitting.

Ensure grey connection is screwed tight on the appliance and not leaking.

Locate the second grey connection fitting. Connect the other end of the blue pipe to this. This second
grey connection fitting is connected to the mains water supply forming a cold water feed from the
mains water supply to the Burco boiler.

Do not use old water hoses.
Model CT5L CT10L, PB CT20L CT20L TT SL5L, PB SL10L,PB SL10L EH
Height (mm) 457 578 695 518 627 668
Width (mm) 358 215
Depth (mm) 464 373
Capacity (Litres) 5 10 20 5 10
10
Weight (Kg) 11 12 13 14 10 11
11.5
Ambient Temperature 5°C
– 30°C
Water Inlet Pressure 1
– 8 (Bar)
Voltage 220-240V (50/60Hz)
Power Rating 3kW 6kW 3kW