BUNNING LoPro 670, Owner'S Manual

Page: 8 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
6
INTRODUCTION
This manual provides information on the use, adjustment and servicing of the GT Bunning range of Lowlander
spreader.
Following the advice on the correct maintenance and servicing procedures will ensure maximum performance and
a long service life of your machine.
Failure to carry out maintenance work correctly, or incorrect operation will result in poor machine efficiency and
loss of valuable time.
By ensuring the correct operation, and by carrying out maintenance and service work with care, you will be able to
make full use of the technical knowledge and the experience with which your Lowlander spreader was originally
designed.
DISPOSAL
Upon completion of the useful life of the machine, all parts can be disposed of at a suitable waste disposal facility.
Care must be taken if oxy‐acetylene cutting equipment is to be used.
The wheels and tires, hydraulic cylinders, valves and hoses must be removed before using cutting equipment.
Oil must be drained collected and disposed of in accordance with current legislation.
Electrical components must be disposed of in accordance with the relevant legislation.