BUNNING LoPro 670, Owner'S Manual

Page: 13 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
11
1.3 Floor adjustment.
When adjusting floor chains ensure that the adjustment is carried out equally to both sides.
DO NOT ALLOW THE CHAINS TO BECOME TOO LOOSE.
ADJUST CHAINS AFTER A FEW LOADS.
KEEP CHAINS ADJUSTED CORRECTLY AT ALL TIMES, A GUIDE IS TO BE ABLE TO SEE A WHOLE LINK BELOW
FRONT BOTTOM EDGE OF SPREADER i.e. FROM CENTRE TO FRONT.
Reverse floor
The floor should only be reversed for very short periods, to clear the augers.
Do not reverse if the floor chain is slack, tighten floor chain first.
1.4 Method of operation.
1) Select speed of floor required on control valve.
2) Engage PTO to power the rear augers – tractor engine revs low.
3) Raise slurry door fitted.
4) Engage spool valve to power floor to rear.
1.5 Slurry Door
As the load height reduces lower the slurry door to cover the augers. This will help prevent foreign
objects being thrown forward.