BUNNING LoPro 670, Owner'S Manual

Page: 55 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
53
6. IMPORTANT INFORMATION
When using the speader in conjunction with a tractor which has a fast and slow response control on the
spool valves, check that the control on the spool valve is not in the slow position in respect of the floor
drives, as this will over ride the variable floor speed.
The spreader always runs very quietly when working, if loud banging noises are heard this will mean that
foreign objects are in the material. Obviously the shearbolt may well break. If the shearbolts on the PTO
has not sheared and the noises persists STOP THE SPREADER SWITCH OFF TRACTOR ENGINE and check
the spreader.
From new, it is strongly recommended that you do not use a high pressure cold washer and definatley not
a hot pressure washer to the outside of the spreader for 12 weeks .
This will damage the paintwork whilst normal curing of the paint takes place.
Careful low pressure washing is acceptable.
Do not let manure dry and set on fresh paint for the first 3‐4 weeks. During this period it is advisable to
clean the machine after use as instructed.