BUNNING LoPro 670, Owner'S Manual

Page: 14 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
12
2. MAINTENANCE
2.1 Lubrication of spreader.
DAILY GREASE Front and rear floor shaft
Overrun clutch to front of main ‘T’ gearbox
Hitch eye
WEEKLY GREASE All sealed bearing – 1/2 pump of grease gun maximum.
TAKE CARE NOT TO DAMAGE GREASE SEAL BY OVERGREASING
Sliding tube of PTO shaft.
PTO universal joints – Follow manufacturer’s instructions.
Screwjack top (when fitted)
Shearbolt bush
MONTHLY Check gearbox oil levels
ANNUALLY
Change oil to all gearboxes
TYPE OF LUBRICATION GREASE
Multi purpose
GEARBOXES
EP90
2.2 Servicing intervals
The period recommended is based on normal operating conditions. Severe or unusual conditions may require
more frequent lubrication or oil changes.
IMPORTANT: ENSURE CV JOINT IS GREASED BEFORE FIRST USE!
TAKE CARE NOT TO DAMAGE SEALS BY OVERGREASING .
DAILY (8 HRS)
1. Check for hydraulic fluid leaks and damaged hoses.
2. Grease Front and Rear floor chain shaft bearings.
a. Front shaft.
• Remove front Finger Guard to access bearings.