BUNNING LoPro 670, Owner'S Manual

Page: 16 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
14
4. Grease PTO input drive system.
a. Input shaft.
b. Cross joint fittings.
c. Guard bearings.
d. Shear bolt housing.
e. Over‐running clutch (5 pumps).
5. Grease the implement jack top.
6. Check gearbox oil level
a. Floor Chain Drive Gearbox
- Oil should be level with the middle of the sight glass.
-
Add oil as required through the top plug.
b. Auger Gearbox
- Spreader must be unhooked from tractor and set on level ground to check oil. Oil should be level with
the middle of the sight glass.
-
Add oil as required through the top plug.
- Oil may take a while to distribute in casing, recheck level after 30 – 40 minutes and repeat if necessary.
MONTHLY
1.
Apply grease or heavy oil to apron chain.
2.
Grease telescoping section of PTO shaft.
3.
Grease the CV Joint of PTO shaft (15 pumps)
4.
Grease suspension system spring bushings on each side.