Page 35
P2609
LEFT OZ XX.X
(-) DONE (+)
NEW L BYPS FLOW
XX.X OZ/M
L or R
Left or Right
EXIT TO THE
NEXT FUNCTION
SCREEN
COUNTS DOWN
TO ZERO
BREW PRESSED
AFTER 1 MINUTE
CALIBRATE FLOW?
NO YES
CONTAINER RDY?
NO YES
CALIBRATE BYPASS
PRESS BREW START
CALIBRATE BYPASS
60 SEC TO FINISH
BYPASS CAL?
NO YES
SPRAYHEAD CAL?
NO YES
CALIBRATE FLOW (cont.)
BREW COUNTERS
This function allows the operator to track the
number of brew cycles completed on the left side, the
right side, and the total of both combined. There are
three resettable counters, and one life counter that is
not resettable.
EXIT TO
NEXT FUNCTION
SCREEN
RESETS LEFT
COUNTER
RESETS RIGHT
COUNTER
RESETS BOTH
LEFT AND RIGHT
COUNTERS
LEFT XXXX
NEXT RESET
L + R XXXX
NEXT RESET
L + R XXXX
NEXT
RIGHT XXXX
NEXT RESET
BREW COUNTERS?
NO YES
Procedures to view/reset the brew counters
:
1. Press and hold the upper right hidden switch until
the display reads
UNITS
. Release the switch. Con-
tinue to press and release switch until the display
reads
BREW COUNTERS
.
2. Pressing
NO
in this screen will advance to the
next function. Press
YES
to view the first brew
counter (left). This number represents the brew
cycles initiated since that counter was last reset.
3. To advance to the other counters, press and release
NEXT.
The four counters are as follows:
LEFT -
total brews on left side (resettable)
RIGHT -
total brews on right side (resettable)
LEFT AND RIGHT -
total brews on left and right
sides combined (resettable)
LEFT AND RIGHT -
total brews on left and right
sides combined (non-resettable)
4. To reset any of the counters to zero (except for the
non-resettable counter), press and release
RESET
when viewing that particular counter's screen.
P2308
PROGRAMMING THE BREWER (cont.)
29877-3 062005
