Bunn Single SH BrewWISE DBC Installation And Operating Manual Download Page 10

Page: 10 / 54

Page 10

PROGRAMMING

Using the menu-driven display on the front of the brewer, the operator has the ability to alter or modify various

brewing parameters such as brew temperatures, brew volumes, bypass percentages, etc. This allows for the

precise brewing of various flavors of coffee.

Programming of the brewer is achieved by entering a certain function. Then, by the use of hidden programming

switches, the operator can customize the brewing process to their specifications.

PROGRAMMING SWITCHES

To access the programming mode, and to scroll through the different function screens, hidden programming

switches are used. There are five of these switches that will be used for the setup of the brewer.

3 4 5

® symbol

(upper right of the BUNN logo)

This is used to access the programming mode and is also used to scroll forward through the function

list.

Upper left corner

of the "B" in the BUNN logo

This is used to scroll backwards through the function list.

"Digital"

(lower left under the display)

This is used to select options that appear on the display during programming.

"Brewer"

(center under the display)

This is used to select options that appear on the display during programming.

"Control"

(lower right under the display)

This is used to select options that appear on the display during programming.

P2289

29877-3 062005

READY TO BREW

WATER TEMP: 200°

Summary of Contents for Single SH BrewWISE DBC























































Search results

Summary of Contents for Single SH BrewWISE DBC

Reviews:

Related manuals for Single SH BrewWISE DBC

Brands by name

Popular brands

Bunn Single SH BrewWISE DBC, Installation And Operating Manual

Search results

Summary of Contents for Single SH BrewWISE DBC

Reviews:

Related manuals for Single SH BrewWISE DBC

Brands by name

Popular brands