Page 26
SET PULSE BREW - EASY PULSE SETUP
NOTE:
The procedure to enter the
PULSE BREW
function must be performed prior to following the
steps listed below.
1. The display should read
BREW TIME: X.XX
and
a batch size indicator will be flashing.
2. Using (-) and (+), set the desired brew time for
the selected batch size.
5 SEC. DELAY
SET PULSE BREW?
NO YES
3 BATCHES DONE?
NO YES
3 BATCHES DONE?
NO YES
COFFEE NAME
SETUP COMPLETE
BREW TIME XX.X
(-) DONE (+)
DRIP TIME XX.X
(-) DONE (+)
1st
OFF
LAST
XX.X
XX.X XX.X
EASY PULSE SETUP
NO YES
ENTER TIMES ?
NO YES
See
SET PULSE BREW-
ENTER TIMES
3. When finished, select another batch size to be set
by pressing the switch next to the indicator light.
Repeat step 2 for each batch size to be set.
4. When finished setting all batch sizes, press done.
The display should read
3 BATCHES DONE ?
.
5. If the three batch sizes are not correct, press and
release
NO
to return to
BREW TIME
setup screen
and repeat steps 2 thru 4. If they are correct, press
YES
. This will display the
1st
,
OFF
, and
LAST
times
for 5 seconds, then advance to the
DRIP TIME
setup. (See
DRIP TIME SET UP
)
PROGRAMMING THE BREWER (cont.)
29877-3 062005
P3507
