Page 23
% BYPASS
This function allows adjustment of the amount of
water that bypasses the grounds. The number signi-
fies the percentage of the brew volume which does
not flow over the coffee grounds.
Modifying recipes - bypass percentages:
Range: 0% to 90% for all three batch sizes
NOTE:
If the brewer is already in the
% BYPASS
screen,
it is not necessary to follow steps 1 through 6 in this
section, but proceed directly to step 7.
1. Press and hold the upper right hidden switch (®)
until the display reads
UNITS.
Release the switch,
then press and release the switch until the display
reads
REVIEW RECIPES
.
2. Press
YES
to proceed. The display should now
read
NO-NAME LEFT,
along with
MODIFY, SHOW
and
NEXT.
3. Press and release
NEXT
to advance to the desired
coffee name to be modified.
REVIEW RECIPES?
NO YES
3 BATCHES DONE?
NO YES
3 BATCHES DONE?
NO YES
SET PULSE BREW?
NO YES
BREW OZ. XX.X
(-) DONE (+)
% BYPASS XX.X
(-) DONE (+)
NO-NAME LEFT
MODIFYSHOWNEXT
(COFFEE NAME)
MODIFYSHOWNEXT
THAT WAS THE
LAST RECIPE
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING
NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
SEE
MODIFYING
PULSE BREW ON
THE FOLLOWING PAGE
OR PRESS AND RELEASE
EITHER ON/OFF SWITCH TO
EXIT THE % BYPASS SETUP
AND RETURN TO THE MAIN
SCREEN
P2292
4. Press and release
MODIFY.
The display should
read
BREW OZ.
5. Press and release
DONE
. The display should read
3 BATCHES DONE?
.
6. Press and release
YES
. The display should now
read
% BYPASS
, and a batch light will be blinking.
Press and release the batch size to be modified.
7. Using
(-)
and
(+)
set the amount of bypass water
(percentage) to be dispensed
around
the grounds
for that particular batch size.
8. When finished, press another batch size and repeat
step 7 for each batch to be modified.
9. When finished setting all batch sizes, press
DONE
.
The display should read
3 BATCHES DONE?
10. If they are not correct, press and release
NO
to
return to the
% BYPASS
setup screen.
11. If the 3 batch sizes are correct, press
YES
. This will
advance to
SET PULSE BREW
. Another alternative
is to press either ON/OFF switch to exit
% BYPASS
setup and return to the
MAIN SCREEN.
PROGRAMMING THE BREWER (cont.)
29877-3 062005
