24
PHYSICAL INSTALLA
TION
MOUNT AND CONNECT THE HDGT
1. Confirm that the HDGT
(with the RAM
®
Mount)
can connect to
the data plug with a reasonable amount of slack on the cable in
the chosen final position.
2. Assemble the RAM Mount and mount the HDGT:
• Connect the RAM adapter to the backside of the HDGT by matching
up the T-slot connection and then sliding it into place.
• Loosen the screw on the RAM arm.
• Connect the RAM arm to the adapter and the suction cup.
(Leave
the screw on the RAM arm loose for the next few steps).
• Open the suction cup by twisting the top of the base in a counter-
clockwise direction.
• Place the suction cup on the windshield (or dash) and anchor it by
twisting the top of the base in a clockwise direction.
• Adjust the final position of the HDGT by moving the RAM arm and
the ball connections.
• Tighten the screw on the RAM arm.
• Plug the HDMI cable into the HDMI port on the back of the HDGT.
