Bulls 21-17-1093, Translation Of The Original Operating Instructions

Page: 44 / 139

MY21B01 - 22_1.0_10.09.2020
44
Assembly
5.4 Preparing the battery
5.4.1 Checking the battery
The battery must be checked before it is charged
for the first time.
1 Press the On-Off button (battery) .

If none of the LEDs on the battery level
indicator light up, the battery may be damaged.

The battery may be fully charged if at least one,
but not all, of the LEDs on the battery level
indicator is lit up.
5.4.2 Retrofitting a PowerTube
Adapter 400 or 500
A PowerTube Adapter 400 or 500 needs to be
retrofitted to use a Bosch PowerTube 625 battery.
1 Use a TORX® T25 wrench to undo the screws
in the battery mount.
Figure 27: Undoing screws on battery mount
2 Use a ratchet to remove the two 4 mm hexagon
screws in the PowerTube adapter. If you don't
have a ratchet, you can use a hexagonal key to
remove the screws.
Figure 28: Removing the 4 mm hexagon screws
3 Use a ratchet to remove the two 4 mm hexagon
screws in the PowerTube adapter.
Figure 29: Removing hexagon screws
4 Pull out the PowerTube adapter.
Figure 30: Pulling out the PowerTube adapter
5 Use adapter plates to adjust the distance if
necessary.
Figure 31: Fitted adapter plates