MY21B01 - 22_1.0_02.09.2020
77
Operation
6.12
Electric drive system
6.12.1 Switching on the electric drive
system
A sufficiently charged battery has been inserted
into the pedelec.
The battery is firmly positioned. The battery key
has been removed.
The on-board computer has been inserted
correctly into the mount.
There are three options for switching on the drive
system.
On-Off button (battery)
Press the
On-Off button (battery)
briefly.
On-Off button (on-board computer)
Press the
On-Off button (on-board computer)
briefly.
Switched-on on-board computer
If the on-board computer is already switched
on when it is inserted into its mount, the electric
drive system is switched on automatically.
After switching on, a speed of 0 KM/H is
displayed on the
on-board computer
. If it is not,
check whether the
on-board computer
is fully
engaged into position.
If the drive system is switched on, the drive is
activated as soon as the pedals are moved with
sufficient force (except if in push assist mode
or the level of assistance is "OFF").
The motor power is determined by the level of
assistance set on the on-board computer.
As soon as the system has been activated,
ACTIVE LINE/PERFORMANCE LINE
appears briefly on the
on-board computer
.
6.12.2 Switching off the electric drive
system
As soon as you stop pushing the pedals in normal
mode or reach a speed of 25 km/h, the drive
system switches off the assistance system. The
assistance system starts up again if you push the
pedals and your speed is less than 25 km/h.
The system switches off automatically ten minutes
after the last command. There are three options
for switching off the drive system manually.
On-Off button (on-board computer)
Press the
On-Off button (on-board computer)
briefly.
On-Off button (battery)
Press the
On-Off button (battery)
.
Removing the on-board computer
Remove the
on-board computer
from the
mount.
The LEDs on the operating status and battery
level indicator go out.
Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by the application of force on the pedals.
There is a risk of a crash if the drive is activated
unintentionally, and the brake is not reached.
Never start the electric drive system, or switch it
off immediately, if the brake cannot be reached
safely and reliably.
CAUTION
!
Summary of Contents for 21-17-1093
