Bulls 21-17-1093, Translation Of The Original Operating Instructions

Page: 36 / 139

MY21B01 - 22_1.0_10.09.2020
36
Overview
3.5.4 ABS indicator lamp
Only applies to pedelecs with this equipment
The anti-blocking system indicator lamp must light
up after the system has started up and must go
out once speed has reached about 5 km/h. If the
ABS indicator lamp does not light up when the
electric drive system starts, the ABS is defective.
An error code on the display also tells the rider
that it is defective.
:
Figure 24: ABS error message on the Kiox display
If the indicator lamp does not go out after you set
off or it lights up while you are riding, this means
there is an error in the anti-blocking system. The
anti-blocking system is then no longer active. The
brake system itself remains functional. It is only
the anti-blocking system control which no longer
operates.
If the ABS indicator lamp is lit, the ABS function is
not active.
Stop pedelec, switch off and restart to reactivate
the anti-blocking system.
3.5.5 Control panel
Figure 25: Control panel overview
Notice
The anti-blocking system indicator lamp may light
up if the front and rear wheels are rotating at
widely different speeds from one another – for
example, if the rider cycles on the rear wheel only
or if a wheel is rotating for a unusually long time
without making contact with the ground (fitting
stand). The anti-blocking system switches off in
such cases.
Symbol Designation
1
<
Back button
2 Select button
3
>
Browse forwards button
4
+
Plus button
5 Push assist button
6
–
Minus button
Table 34: Overview of the control panel
3
1
2
4
6