Bulls 21-17-1093, Translation Of The Original Operating Instructions

Page: 89 / 139

MY21B01 - 22_1.0_02.09.2020
89
Operation
6.15.3 Adjusting the compression in a
RockShox damper
Only applies to pedelecs with this equipment
The compression damper controls the speed at
which the rear frame damper deflects during slow
impact, such as smaller impacts or when the rider
goes round a corner or shifts their weight. The
compression damper improves control and
efficiency.
If the compression damper is set too high,
suspension is too hard when exposed to impacts.
The damper lever is used to set the compression
damper.
 Turn the setting wheel in a clockwise
direction (+) to decrease the deflection speed.
 Turn the damper lever in an anti-clockwise
direction (–) to increase the deflection speed.
Figure 97: Setting the compression damper hardness
using the damper lever (1) for the rear frame damper
1