1/31/02
10
Output wire, the H4/9 wire or H7/1 wire.
TRANSPONDER / GM PASSLOCK III
:
PATS, ‘Smart Key’, GM PASSLOCK III, Sentry Key, Securi-Lock
and others, are all TRANSPONDER SYSTEMS:
Note: For this type of Anti-Theft System – you must sacrifice one of your spare Programmed Transponder Ignition Keys
that STARTS this vehicle. This extra
TRANSPONDER Key
will be
PLACED INSIDE
the Anti-Theft Bypass Module
, your
dealership can program an extra spare key, you can get one from a local Lock Smith or purchase one through JBS
Technologies, but make sure they program all keys to the vehicle since learning just one transponder could erase all other
key transponders (including the key used for the Bypass Module).
1. Again, an extra
Programmed Transponder Ignition Key
that starts the vehicle, will need to be placed inside the
Anti-Theft Bypass Module.
2.
Pull apart the case and place the
Programmed TRANSPONDER KEY
, inside the
10-Wire Loop
on the circuit board.
Transponder Keys are directional and must be placed along the same direction that the key would lay in the Ignition
