manualshive.com logo in svg

Bull Escala PL 1650R-L+, Hardware Information

Share
Download
Bull Escala PL 1650R-L+ Hardware Information Download Page 24

Gain access to the Advanced System Management Interface (ASMI). See 

Managing the Advanced

System Management Interface (ASMI)

 for instructions.

• 

Replace the control panel

To replace the control panels with the power on, complete the following steps:

Perform the prerequisite tasks described in 

Before you begin

.

1. 

If you have not already done so, remove the control panel with power on. See 

Remove the control

panel with power on

.

Attention:

 A control panel or control panel filler must be in place when the system power is on for

proper air flow and cooling. See 

Model ESCALA PL 250T/R, ESCALA PL 450T/R, ESCALA PL

850R/PL 1650R/R+, and 7/20 control panel fillers

 for instructions on removing a control panel filler.

2. 

If necessary, remove the new control panel from its packaging. If there are control-panel overlays
included with the new control panel, install the appropriate overlay on the control panel.

Note:

 Remove the machine type label, with the serial number, from the front of the existing control

panel and place the label on the new control panel.

3. 

Carefully slide the control panel into the control panel bay until you feel the locking tabs A lock in
place.

Figure 1. Control panel replacement

4. 

Access the Advanced System Management Interface (ASMI). See 

Managing the Advanced System

Management Interface (ASMI)

 for instructions.

5. 

In the navigation area of the ASMI, select Concurrent maintenance and then Control panel.

6. 

At the control panel window, select Install and click Continue.

7. 

Choose the control panel's location and click Save Settings.

8. 

If the operation was successful, the window will display 

Operation completed successfully

.

Note:

 If there is a frozen bouncing ball (dot) that appears in the middle of the control panel, toggle

between function 02 and function 01 until the ball disappears.

9. 

Install the front cover onto your system. Refer to 

Install the front cover on the model ESCALA PL

1650R-L+ or ESCALA PL 850R/PL 1650R/R+

.

10. 

Control panel

18

Replace the control panel with power on

Summary of Contents for Escala PL 1650R-L+



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands